If ``w'' is selected in #14.2 or #14.3, the wiring for individual cells may be revised. Note that this does not apply if the wiring was set as ``regular 1d'' in #10.2. To allow regular 1d wiring to be revised it must be set in ``special wiring'' (#11.3) and the option set to treat local 1d wiring as non-local wiring.
The following context dependent secondary window is presented in the lower right corner of the screen.
REWIRE cell=33 move-arrows jump-j cont-ret (values shown are examples)
change k=8 nhood-n (if neighbourhood mix was set)
hand-h random-r special-rand-s reg 1d-1 reg 2d-2: (reg 2d only for a 2d network)
While this prompt is displayed, the arrow keys may be used to move between cells, or ``j'' may be entered to jump to a new cell index (as in #14.2.1 and #14.3.1).
Once the cell's wiring has been revised by one on the various methods, the new wiring is immediately displayed, the out-degree and other data is updated, and the program reverts to this prompt (#14.5).
Note that once the rule scheme has been set (see #13), the rule relative to the individual cell is displayed in a lower rule window.